Husqvarna 572XP Problems: Common Issues and Solutions

  • By: Michael Barnes
  • Time to read: 9 min.

As a user of Husqvarna 572XP chainsaw, you may have come across certain issues and problems while operating the machine. Manufactured by a well-reputed company, Husqvarna 572XP is often seen as a reliable and efficient choice when it comes to chainsaws. However, even such a popular tool can face common problems in certain situations.

To better understand and address the problems with your Husqvarna 572XP, a detailed investigation of the sources and causes of these issues is essential. Throughout this article, you will find valuable information on possible problems and their respective solutions, ensuring the optimal performance of your chainsaw.

Some of the most frequently reported problems include difficulties in starting the chainsaw, reduced cutting efficiency, and excessive vibration. By looking into the root cause of these problems and addressing them using appropriate techniques, you can greatly enhance your overall experience with the Husqvarna 572XP chainsaw.

Common Issues and Solutions

Carburetor Problems

Carburetor issues can occur in your Husqvarna 572XP, which may cause the chainsaw to run poorly or not start at all. Common symptoms include hard starting, stalling, and erratic idling. To fix these problems, start by inspecting the carburetor for dirt, debris, or damage. Clean it thoroughly using carburetor cleaner and consider adjusting the mixture screws for optimal performance. If the problem persists, consider replacing the carburetor or its components, such as the diaphragm or needle valve.

Ignition Coil Issues

Ignition coil problems can result in a weak or nonexistent spark, leading to starting difficulties or decreased power. To resolve this issue, first inspect the spark plug and boot for damage and replace them if needed. Then, check the ignition coil’s resistance using a multimeter. If the resistance values are outside the acceptable range, replace the ignition coil. Regular maintenance, such as cleaning the area around the coil, can help prevent future issues.

Air Filter Issues

A clogged or damaged air filter can restrict airflow, causing your chainsaw to run inefficiently, overheat, or lose power. Regularly check the air filter and clean or replace it as needed. Ensure that the air filter cover is securely in place, and inspect the intake system for any cracks or leaks that can allow unfiltered air into the engine.

Fuel Related Issues

Fuel-related problems in your Husqvarna 572XP can cause poor performance, starting difficulties, or sudden engine shutdowns. Always use fresh, high-quality gasoline mixed with the appropriate amount of 2-stroke oil. Regularly check the fuel filter, lines, and tank for any damage or clogs and replace them if necessary. Ensure that the fuel cap is properly vented, allowing air to enter the tank and prevent vapor lock.

Muffler and Exhaust Issues

Muffler and exhaust issues can lead to poor engine performance, reduced power, and increased noise levels. Inspect the exhaust system for carbon deposits, cracks, or damage, and clean or repair as needed. Be sure to replace any damaged gaskets or fasteners to ensure a proper seal. Regular maintenance, such as cleaning the spark arrestor screen, can help prevent future problems and keep your chainsaw running efficiently.

Husqvarna 572XP Problems

Comparing With Competitors

Husqvarna 572XP vs Stihl Models

When you’re deciding between the Husqvarna 572XP and comparable Stihl models, consider factors like power, weight, features, and price. While both brands offer high-quality chainsaws, their specifications and performance differ slightly.

The Husqvarna 572XP is known for its X-Torq technology, which ensures low fuel consumption and reduced exhaust emissions. This chainsaw has 70.6cc of engine displacement and delivers an impressive 5.8 horsepower. The AutoTune feature adjusts the carburetor for optimal performance even under changing conditions.

On the other hand, a close competitor from Stihl is the MS 462 C-M chainsaw. It features a 72.2cc engine and generates 6.0 horsepower. The Stihl model also has an advanced fuel management system, called M-Tronic, which automatically adjusts the engine settings for optimal performance.

When comparing weight, the Husqvarna 572XP is lighter than some Stihl models. It weighs approximately 14.5 lbs without cutting equipment, while the Stihl MS 462 C-M weighs around 14.8 lbs in a similar configuration. Lighter weight contributes to reduced user fatigue and improved maneuverability, especially during extended cutting sessions.

Here are some key features to consider when comparing the two chainsaws:

  • Power: Husqvarna’s 5.8 HP vs Stihl’s 6.0 HP
  • Engine Displacement: Husqvarna’s 70.6cc vs Stihl’s 72.2cc
  • Weight: Husqvarna’s 14.5 lbs vs Stihl’s 14.8 lbs
  • Technology: Husqvarna’s X-Torq and AutoTune vs Stihl’s M-Tronic

In terms of pricing, both models fall into a similar professional-grade chainsaw range. However, prices may vary depending on the retailer and other factors. It’s best to check with your local dealers for accurate price comparisons.

Ultimately, your choice between the Husqvarna 572XP and a Stihl model comes down to your specific needs and preferences. Each chainsaw has its advantages, and a comparison of their key features can help you make an informed decision.

Maintenance and Troubleshooting

Chain and Bar Care

Proper chain and bar care is essential for your Husqvarna 572XP. Regularly check the chain for sharpness, tension, and wear. When you notice dullness, sharpen the chain. It’s also essential to keep the chain at the correct tension to avoid damaging the bar. Additionally, inspect the bar for any signs of wear or damage and replace it if necessary.

  • Sharpen the chain when needed
  • Maintain proper chain tension
  • Inspect and replace the bar if required

Spark Plug Inspection and Replacement

The spark plug is a critical component in your chainsaw’s engine. Inspect the spark plug for signs of wear, corrosion, or fouling. If you find any of these issues, it’s best to replace the spark plug to ensure optimal performance.

  • Regularly inspect the spark plug for wear and damage
  • Replace the spark plug if signs of wear or damage are detected

Oiler System Maintenance

Your Husqvarna 572XP’s oiler system helps keep the chain and bar lubricated, reducing wear and increasing the saw’s longevity. Regularly check the oiler for any leaks or blockages. Clean the oiler system and ensure there’s enough oil in the reservoir to maintain proper lubrication.

  • Check and clean the oiler system
  • Ensure adequate oil levels in the reservoir

Crankshaft and Seals Inspection

It’s essential to inspect your chainsaw’s crankshaft and seals for any signs of wear, damage, or leaks. Worn or damaged seals can lead to hazardous oil leaks, while a damaged crankshaft may cause engine issues. Immediately replace any damaged seals or crankshaft components to maintain the performance and safety of your Husqvarna 572XP.

  • Inspect the crankshaft and seals for wear, damage, and leaks
  • Replace damaged seals or crankshaft components as needed
Husqvarna 572XP Problems

Dealing With Performance Issues

Saw Stalling

If you are experiencing saw stalling with your Husqvarna 572 XP, there could be a few possible reasons.

First, inspect the air filter. A dirty air filter can lead to poor performance, causing the saw to stall. To clean the air filter, remove it from your saw and gently clean it with a soft brush or compressed air.

Secondly, check the fuel mixture. Running your chainsaw with the incorrect ratio of gasoline to oil can cause stalling. The recommended ratio for the Husqvarna 572 XP is 50:1 (50 parts gasoline to 1 part oil). Make sure you’re using fresh fuel and a high-quality two-stroke engine oil.

In addition, consider the chain tension. A chain that is too tight or too loose can cause stalling issues. Adjust the chain tension to the proper setting following your owner’s manual instructions.

Autotune Settings

The Husqvarna 572 XP features an Autotune system that automatically adjusts the carburetor settings based on environmental conditions, ensuring optimal performance. However, if you’re still experiencing performance issues, you can manually adjust the saw’s Autotune settings.

To do this, follow these steps:

  1. Start your chainsaw and let it idle for a minute or two, allowing the engine to warm up.
  2. Locate the Autotune adjustment screws on the carburetor, marked “H” (High-speed jet) and “L” (Low-speed jet).
  3. Use a small, flat-head screwdriver to carefully adjust the “H” screw. Turning it clockwise will lean the fuel mixture (more air, less fuel), while counterclockwise will richen the mixture (more fuel, less air).
  4. Adjust the “L” screw in the same manner, keeping in mind that this controls the idle speed and low-speed performance of the saw.

Remember to make small, incremental adjustments. The optimal settings will depend on your specific working conditions and environmental factors, such as altitude and temperature.

By addressing saw stalling and properly adjusting your Autotune settings, you can improve the performance of your Husqvarna 572 XP chainsaw and prevent any potential issues.

Warranty and Dealer Support

When purchasing a Husqvarna 572XP chainsaw, one of the most important factors to consider is the warranty and dealer support provided. Husqvarna offers a general warranty period for their gas-powered chainsaws, which typically includes coverage for defects in materials and workmanship.

It is crucial to work with an authorized Husqvarna dealer, as they can provide the necessary support and guidance for maintenance or potential problems you might encounter. These dealers are well-versed in working with Husqvarna products, ensuring that you have access to knowledgeable professionals.

Authorized dealers can also assist with the warranty registration process, which is essential for ensuring that your chainsaw is adequately covered. Make sure to keep a record of your purchase, as this might be required for any warranty claims.

In some cases, extended warranty options may be available through your dealer, offering additional peace of mind for your investment. This extended coverage can provide further protection against potential problems arising from normal usage or unforeseen manufacturing issues.

When it comes to maintenance, authorized Husqvarna dealers typically offer a range of services, such as routine tune-ups, part replacements, and troubleshooting assistance. By utilizing these services, you can help prolong the life of your chainsaw and maintain optimal performance levels.

In summary, working with an authorized Husqvarna dealer and understanding the warranty terms can help ensure a positive ownership experience for your 572XP chainsaw. Regular maintenance and support from your dealer can significantly contribute to the product’s longevity and performance.

Accessories and Upgrades

In order to enhance your Husqvarna 572XP chainsaw experience, consider investing in some helpful accessories and upgrades. This section will cover two important components: clutch cover and starter rope options.

Clutch Cover

Upgrading to a better clutch cover can significantly improve the durability and performance of your chainsaw. Some benefits of an upgraded clutch cover include:

  • Better protection: A high-quality clutch cover safeguards your chainsaw from debris and dust, prolonging its life.
  • Improved safety: With a solid clutch cover, you reduce the risk of accidental hand contact with the chainsaw chain.
  • Enhanced performance: Quality clutch covers ensure the proper functioning of the clutch and brake systems, leading to smoother, more efficient cutting.

When looking for a suitable clutch cover, make sure it is compatible with your Husqvarna 572XP. Select a product made of durable material, such as a heavy-duty plastic or metal alloy. Also, opt for easy-to-install options that can be securely fastened to your chainsaw.

Starter Rope Options

The choice of a good starter rope can make a significant impact on the ease of starting your chainsaw and its lifespan. Here are a variety of starter rope options to consider:

  • Material: Starter ropes can be made from various materials, such as nylon, polyester, or polypropylene. Choose a material that offers a balance between strength, durability, and elasticity.
  • Diameter: The appropriate diameter for your starter rope depends on the chainsaw’s size and requirements. For the Husqvarna 572XP, a diameter between 4-6mm works well.
  • Length: Ensure your chosen starter rope has the correct length to properly fit your chainsaw’s specifications and allow for comfortable pulling.

To extend the life of your starter rope, maintain it regularly by inspecting for damage, replacing it when worn, and keeping it clean from dirt or debris.

By investing in the right accessories and upgrades, such as a high-quality clutch cover and starter rope, you can enhance the performance and longevity of your Husqvarna 572XP chainsaw.

Is the Husqvarna 572XP a pro saw?

Yes, the Husqvarna 572XP is considered a professional-grade chainsaw. It is designed for demanding tasks and heavy-duty use.

What does XP mean in Husqvarna chainsaws?

In Husqvarna chainsaws, “XP” stands for “Extra Performance”. It designates Husqvarna’s professional series of chainsaws that are designed with more power and durability to withstand the heavy-duty demands of professional forestry and tree work.

How much horsepower does a Husqvarna 572 XP have?

As of my knowledge cutoff in September 2021, the exact horsepower rating for the Husqvarna 572 XP wasn’t explicitly provided by the manufacturer. However, chainsaws in this class typically have around 4 to 6 horsepower. For the most accurate information, it’s always best to check with the manufacturer or a current Husqvarna dealer.

What CC is a Husqvarna 572 XP?

The Husqvarna 572XP has an engine displacement of 58.8 cc. This indicates the size of the engine’s internal combustion chamber. The larger the cc (cubic centimeters), the more powerful the engine tends to be.

Leave a Reply

Your email address will not be published. Required fields are marked *

What Pump Sprayer Shoots Farthest: Expert Insights and Top Picks

Previous Post

What Pump Sprayer Shoots Farthest: Expert Insights and Top Picks

Next Post

Grow Bag Alternatives: Discover Effective and Eco-Friendly Options

Grow Bag Alternatives: Discover Effective and Eco-Friendly Options